Knife Information from Neilson's Mountain Hollow (2024)

Below is a summary of information on knife/sheath materials, processes and ordering/purchasing information.
If you have any questions, please feel free to reach me on my contact page.

Knives

Steel

Knife Information from Neilson's Mountain Hollow (1)I forge my blades out of high carbon steels such as 1080/84/95, W1-2, 5160, 52100, 15N20, 80CRV2, Cru-forge V and my own Damascus steels, depending on the knife's purpose or your preference. My damascus steel is also forged from the same steels listed above. This means my damascus is a "working" steel, not just a "cool to look at", decorative material.

Most of my blades are flat ground with a convex (apple seed) edge, though some of my larger camp knives and such are also convex grinds... again, purpose and preference. My Scandi-Bushcraft knives are flat ground to a zero edge as tradition requires as well as some of my top clips on Bowie/Fighters. Sole authorship is very important to me which is why I do everything "in house" (with the exception of leather sheaths/scrimshaw/engraving). From designing and heat treating to making my own damascus, I do it right here on the mountain.

As to the "in shop" heat treating of my blades, I prefer to edge or clay quench high carbon steels whereas most damascus blades are fully quenched, unless an edge quench is requested. Scandi-Bushcraft knives are, of course, fully quenched. All blades are put through multiple thermal, hardening and tempering cycles. Since all of my high carbon steel blades are heat treated here, I can guarantee each knife has an extremely tough and durable edge (58-59 Rc).

When completed, there are a variety of final finishes available for your completed blade. I can put a simple satin finish or a fine hand-rubbed finish on my high carbon steel blades. I can also acid etch some steels/blades to bring out the hamon or quench line as well as a deep etch and polish on damascus blades. I also offer my "antiqued" finish which has become a very popular concept from Cowboy shooters (for it's "aged/period" look) to our modern Military and Police personnel for it's non-reflective abilities, low maintanence and resistance to the elements for high carbon blades. I'm starting to "stonewash" blades as well. Your choice for your needs.

Upon finishing, all blades are sharpened and polished to a fine "toothy" edge so your edge will "bite" and then slice through whatever your working with or through. This gives you a very tough, durable and attractive working knife whether it goes into the field or into your collection.

Handles/Hardware

Handle material and hardware are, for the most part, a matter of personal preference and come in an almost endless variety. For handles, I prefer to use a lot of natural materials including Sambar stag, bone, ivory and horn, plus a variety of stabilized burls and exotic woods like Desert Ironwood, Amboyna, Redwood, Maple, and other burls, Cocobola, African Blackwood, etc. All are kiln dried for stability and sealed for durability before being buffed to a high finish. Synthetic materials also play a part in my handles. These includeMicarta,G-10, Kirinite, etc.These can be used as accents or as an entire piece. There are also more than a few choices for your knife's hardware (guards, pommels, pins, etc.) including brass, nickel-silver, bronze, copper, wrought iron, etched, lightly blued or "antiqued" carbon steel as well as stainless steel.

Many of my materials are obtained fromGary @ xoticblanks, Pop's Knife Supply and Texas Farrier Supply& Knife Workswho are great folks and always willing to answer questions about materials/supplies.

Sheaths

Knife Information from Neilson's Mountain Hollow (2)I have sheaths made from vegetable tanned cowhide for almost all of my projects. The vegetable tanning process creates a durable, somewhat rigid leather that will accept carvings, tooling and dyes. Many of my sheaths are done by Mark Condos of Texas. He is, in my opinion, oneof the best traditional sheath makers out there. Hespecializes in traditional pouch, sash and blade sheaths. All sheaths are tooled and stitched by hand and treated with a protective leather finish. Among the many options that make each project unique are posts, exotic inlays, tooling/texturing/carvings and dye color. The vegetable tanning process is much less corrosive to the steel than chrome-tanning, but long term storage of knives in any sheath is not recommended. All of my knves that come with a leather sheath, alsocome with a padded & zippered storage case for that purpose.

I also offer a variety of Kydex sheaths on many of my knives (such as my "Basic Utility Series" and multiple Neck Knives) for those who want a smaller or lighter sheath... or just a different look on a Neilson knife.

Purchases

"I guarantee all the items I make for quality workmanship and performance. If you are not completely satisfied, you can return any item for replacement or a full refund."
- J. Neilson - Mountain Hollow Knives

I accept check/money order, credit card & Paypal. Personal checks will need to clear before a purchase is shipped.

"Hello, J. Neilson here. Because of recent unexpected life altering events (my wife Beckie passed away suddenly this past spring), I have chosen to re-prioritize my business plan & life. Beckie was a big wake up call to me about never knowing how much time you have on this world. I will be cancelling all current custom orders and refunding any deposits that have been made.I will no longer be accepting any new custom orders at this time. I wholeheartedly appreciate your patience and understanding & possible anger in this matter and apologize for any inconvenience or frustration.I will still be making knives and periodically offering pieces for sale. As normal, any new pieces will go up on the e-mailing list for 48hrs. before they are offered anywhere else. For custom orders here are the following fellow bladesmiths I personally recommend:

Vince Molina- www.dreamerforgeknives.com
Keith Bagley- keithbagley14@verizon.net
John Summerhill- jrsummerhill@gmail.com
Jon Nagel- NagelHausForge@gmail.com


Shawn Moulenbelt- www.51bravo.com

I want to express my appreciation for the continued support of my craft and respect of my loss. I'm doing my best to keep going on, I just need some freedom. Again, I apologize and I will appreciate/understand your reply.

Sincerely,
J."

All knives/sheaths are shipped after payment is received via USPS insured priority shipping and are priced at USPS flat rates.

*US residents of Pennsylvania please add appropriate sales tax.

Note: Over time, changes in humidity may cause slight variations to occur in natural handle materials. Knives are meant to be used as cutting instruments, not as screwdrivers or pry bars. Any such abuse will void the warranty. A custom knife will perform admirably for many, many years if given the same care as any good tool or gun. I'm hoping that they will last much longer than me and be handed down to your grandchildren and theirs. All knives are shipped with a coating of oil to protect them during shipping.

Knife-making Classes

Knife-making Classes (I'm sorry but, I am unable to schedule any new classes at the moment)

I do teach blade-smithing/knife-making classes here in my shop in Towanda, PA as well. Anything from basic blade-smithing to damascus making, blade grinding to handle work... anything I do in my shop, I'm willing to pass along.Check out a quick shop tour at:
https://www.facebook.com/james.neilson.528/videos/10207390116944721/

- My classes are for 1-2 people, not large groups, so you will get personal, one-on-one instruction from me and all materials are provided.
- I do not have set class dates. Contact me to discuss the type of class you'd like and to schedule a date that will fit both of our calenders, as well as a list of hotels close by.
- Classes are from 9am to 4pm and are 1-2 days. Most folks don't stop for lunch but, if you'd like, your welcome to bring a lunch or snacks and water is provided.
-There will be a $50.00 deposit (non-refundable) per person when the class is scheduled and all students are required to sign a waiver of liability before class starts.

"Basic Bladesmithing" (1 day class) - In this class we will forge a basic high carbon steel blade/blades. We will cover different blade designs, types of steels, forging techniques as well as thermal cycling/hardening/tempering and grinding a blade. Cost: $600.00/per person.

"Basic Hunters" (2 day class) - This class will cover forging a full tang Hunter (just like my Basic Bladesmithing class) but, you will also learn how to plan, prepare, set and finish your handle and sharpen with a belt. Cost: $1,200.00/per person.

"Advanced Hunters... Hidden Tang with Stag" (2 day class) - My Advanced Hunter class will also cover the forging of a Hunter blade but, in a hidden tang style. This class will focus on my methods of making a strong and safe hidden tang knife and knocking down a lot of the "myth" about hidden tangs. I will show how to set a guard on your knife and my method for "pinning" your knife to a stag crown handle. Cost: $1,400.00/per person.

"Basic Forge Welding/Damascus Making" (1 day class) - This class will cover the basics of forge welding steel. We will cover the different methods to forge weld steel including san mai, laminate and canister damascus as well as how to forge a blade from these materials. Cost: $800.00/per person.

Knife Information from Neilson's Mountain Hollow (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 5769

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.